Semi Auto Steel Mesh Panel Machine

The semi auto steel mesh panel machine consists of 3D panel master welding machine, steel flat net automatic production line and subsidiary equipment that are used to produce 3D boards. The 3D board produced is mainly used in living room space and public space. It is a kind of natural material, free and convenient, convenient and fast.

01PRODUCT PERFORMANCE

Light in Weight:its weight only 4kg/m2 , and no more than 110kg/m2 ever after coated with cement on both side.
Large Load-bearing Capacity: a plate of 2.4m in height 1.22m in width, 110mm in thickness with cement coating, can bear axially over 74.4kN/m2, and horizontally over 1.95kN/m2.

Heat Insulation and Warmth-keeping: heat –resistance as high as 0.64m2k/w, equaling that of a brick wall of 800mm thick.

Sound Insulation:insulate as much as 45dB voice.

Enhance the Useful Area:its thickness can be about 110mm with the cement coating, which can enhance the 10~13% of the useful area.

01SPECIFIC CONSTRUCTION

Installing steel mesh penal 5″ Polystyrene steel mesh Panel.
These panels were installed approximate l2 working day time.

Installing rebar at plate line, Denny is removing foam with large propane torch.

Foam steel mesh panel being installed.The panels on the home weight approximately 45 lbs. each.

Roof System installed on the steel mesh panel system. In this photo you can see the additional re-bars installed over the garage door opening. Also installed are the flat mesh to connect the steel mesh panels.