Hangzhou Epsole Machinery Co.,Ltd.

Product

Home - Product - E-standard grade material

E-standard grade material

E-standard grade material is a widely used ordinary EPS, suitable for automatic vacuum forming machines, electric drive forming machines, and traditional lifting hydraulic presses.

E-standard grade material
E-standard grade material
E-standard grade material

01How do we classfiy EPS Material?

EPS(Expandable Poly Styrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expansion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then molded into appropriate forms suited to their application. Products made from foamed polystyrene are nearly ubiquitous, for example packing materials, insulation, and foam drink cups.

E-standard grade material is a widely used ordinary EPS, suitable for automatic vacuum forming machines, electric drive forming machines, and traditional lifting hydraulic presses. It is a standard foaming ratio raw material, which can be foamed to achieve lighter density foams at a time. Generally, it is more suitable for products with a foaming rate of 13 g/l or more. It is widely used in electrical packaging, thermal insulation materials, and fishing floats. , Handicrafts, decorations, lost foam castings, etc.

Product Features:
1. Fast foaming speed;
2. Standard foaming ratio (the ratio is lower than P material);
3. Low energy consumption and steam saving;
4. Short curing time and molding cycle;
5. The product has good sinterability;
6. Smooth surface;
7. The size is stable, the strength is high, the applicability is strong, and the product is not easy to shrink and deform.

01Detail

01FEATURES

EPS(Expandable Polystyrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expandsion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production.The gas expands under the action of heat, applied as steam, to form perfectly clesed cells of EPS.

Storage standard EPS contains volatile and combustible composition and should therefore be kept far away from any source of ignition, perferable in a cool, dry and well-ventilated storeroom below 25 ℃ out of direct sunlight.

 

 

 

01More About Us

01Certificate

01Packing & Delivery

 

Packing Weight/KG 20’Fcl Container 40’Fcl Container
Paper Bag (Laminated Kraft Paper) 25 17.00MT 25.5MT
Flecon Bag (Super Sack) 850 17.00MT 25.5MT

 

 

 

02Application Case

06Send a Message