ETPU Shoes Shape Moulding Machine

Foamed thermoplastic polyurethane is a crystalline physical foaming material, non-toxic, odorless, degradable, and more environmentally friendly; with high strength and heat resistance, wear resistance; shock absorption, light and comfortable, high rebound, antibacterial, breathable, foam Power can be up to 10 times. The midsole made of foamed microspheres can effectively absorb the impact on the feet during running, provide good shock absorption for the feet, and bring a unique running experience for runners.

01FEATURES

Running shoes can be roughly divided into two categories: structural cushioning and material cushioning.Structural cushioning is to make the midsole into a “bow” -like structure to absorb the pressure from the ground.The material cushioning uses a special Elastic material creates a midsole to achieve the purpose.

The E-TPU material is not only lightweight but also elastic over a wide temperature range. Even in the severe cold of minus 20 ° C, its excellent performance is ensured; the material rebound rate is as high as 50-55%, and the compression set is low.

01VACUUM SYSTEM

Compared with the traditional EVA midsole,the E-TPU midsole uses a physically foamed polyurethane material, which is popcorn- shaped after molding, has excellent resilience and deformation recovery, and its performance is far superior to traditional EVA materials.
In order to make the machine easier to access, we decided to use a detachable machine screw as its structure. The advantage of it is that it’s easily access to the machine if there are any problem.
The hydraulic system design is still a big challenge for machine manufacturers. Because clients always expect efficiency, reliability, accuracy, and ease of maintenance.
Therefore our machines use four directional control vales, to open and close the mold at the most adequate speed. Also use the latest technology lock mold, for an effective maintain of the lock mold pressure, and to ensure that the mold does not leak.

01MANUFACTURING

Our factory is located in the Xindeng, Hangzhou.

Styrofoam Machine’s Anti-rust Processing

We focused on top quality shape molding machine and other foam equipment for over 20 years in China.

Product

ETPU Shoes Shape Moulding Machine

01FEATURES

01VACUUM SYSTEM

01MANUFACTURING

02Application Case

06Send a Message