2022.12.21
The access voltage of the stepper driver on the CNC cutting machine is 36 volts DC, and there are two indicator lights, red and green, on the driver. When the input voltage of the driver is unstable or lacks phase, the red light will give an alarm, and the green light will indicate normal operation. , so the foam machinery equipment factory can also make simple judgments and repairs for customers who do not understand the drive. The drive is the main factor that directly affects the normal operation of the CNC cutting machine. If there is a problem with the signal input or output on the drive, it will cause the motor of the CNC cutting machine to not move, or the foam machinery and equipment will struggle, tremble, and walk randomly, etc. various situations.
The stepping drive of the CNC foam cutting machine is mainly composed of a driver and a stepping motor. The signal is output from the operating system of the CNC foam cutting machine, connected to the driver of the stepping motor, and the converted signal is output to the motor to make the stepping motor walk. The drive of the stepping motor is relatively simple compared with the servo drive, and it is easier to adjust and maintain. Compared with the servo drive and motor, some domestic better stepping drives and stepping motors are not bad in the use of CNC cutting machines.
Tel:
English 
