Tel: +86-18868710888 571-81110023
ricky@epsole.com
Home
Product
Video
About us
Contact us
September
Light in weight. The EPS sandwich panel reduced the base load of the beam crossing section on the frame structure, and the 3d EPS blocks increased the usable floor area of the building, in addition the EPS sandwich wall panel decrease the total cost.
3D EPS Panel Machine The 3D panel is a unique and effective way to easily create a strong insulated concrete building or wall.
July
Barrel body temperature and vapor pressure, the use of advanced high -precision Japanese pilot valve control, ensure that the pressure relief valve outlet is always constant , ensure that the temperature inside the tank advance machine control within ±1% ºC of , so as to ensure the consistency of raw EPS issued prevent EPS material because the temperature control is not good agglomeration.
We must check the front and back of the foam forming machine. It is necessary to determine whether the equipment can be used normally, whether there is abnormal buzzing, etc.Confirm the indicator light. If there are some faults, the corresponding indicator will also be directly lit. Then we can't function normally. We must first check to make sure that the fault is resolved before use.After use, stop the equipment, turn off the related power supply, valve, continue to use, turn on, etc. to avoid unnecessary problems.
E-mail
Message
Contact
Tel:
English 
